THERMO-SOURCE frost-resistant waterer with insulated double-walled which provide frost-free water without use of electricity even at temperature below zero.
Made of premium quality polyethylene and perfect for cold areas without electricity.
The double-walled tub and cover are filled with polyurethane foam which assure a perfect insulation.
Water inlet comes from underground pipes and water is warmed by the heat coming for the ground.
Water runs into the drinker through the high-capacity Maxiflow float valve and water level is adjustable.
Constant drinking by animals guarantees a renewal of "heart-warmed" water in the drinker.
The drinking place is closed with a ball, which is pushed aside by the animals when they want to drink. Once it's done, the ball closes the opening.
Drainage hole to drain water.
Comes standard with a flexible stainless steel hose and floor insulation seal
Frost-resistant down to -25 °C and up to -35oC if a heating element is added (a transformer is necessary).
- With one drinking station, 40 litres capacity (9 gal).
Water supply enough for 20 large animals. During a frost period, we recommend a minimum of 10 animals per station.
With two drinking stations, 75 litres capacity (16,5 gal).
Water supply enough for 40 large animals. During a frost period, we recommend a minimum of 20 animals per station.
- 24 V-180 W heating element (131.6070)
- 200W or 500W transformer (transfo-200Ik, transfo-500Ik)
Recommended for: dairy cows and horses
- Width (KG)
- Height (CM)
- Width (CM)
- Length (CM)