Plastic water trough, Model 5910, 6'6'', 130L, on ground

Conical and inclined large water trough made of UV-resistant polyethylene.
Ground mounting. Frame and legs made of stainless steel.

Large drain plug for quick cleaning.

Equipped as standard with a MAXIFLOW float valve ensuring a water flow of up to 40 L/min (10 gal/min).

3/4" male connection from the front.

Capacity of approximately 130 litres (29 gal).

Large drain plug for quick cleaning.

Height of the legs is approx. 34'' (86 cm)

Options for frost protection with a heating element:
24V-180W to be placed inside the float valve unit. A 110/24V transformer supplies the power. To keep the water supply from freezing, a heating cable can be installed along the water line. If a polyethylene pipe is used we recommand covering it with an aluminium strip before installing the heating cable to better distribute the heat.

Accessories:
- Protection plate to fix on top that protect float valve (131.5906)
- Protection plate to fix aside that protect water pipe as well as heating cable (131.5905)
- Galvanized rotection bar (103.5907)
- Low pressure Masterflow float valve 738 (131.0738)
- Maxiflow float valve 700 (131.0700)
- 24V, 180W heating element (131.6069
- 200W or 500W transformer (transfo-200 or 500Ik)
- On/off thermostat (101.0389)
- Heating cables 20W or 30W (101.0861 ou 101.1863)
- Aluminium adhesive tape (101.1099)