Constant water level double trough, Model 620, Suevia

Constant water level trough with two drinking stations

- Having a double trough prevents jostling at water points.

- Continual and efficient drinking of the animals thanks to the high-performance MAXIFLOW float valve, water flow up to 40 l/min (8,8 gal).

- Comes with a side bracket for wall or post mounting.

- Perfect for free-stall installations. Sufficient for 30 to 40 animals. 

- Large drainage hole inside the tub.

Features:

- Completely made of stainless steel.

- Possibility to do a connection to a water loop circuit with specific accessories.

- Covered top to prevent dirt entry.

- 3/4’’ male connection from left or right handside by inverting the float valve.

Options for frost protection down to -20^oC

- 24 V-80 W heating element for easy installation under the trough.
- In order to ensure a frost-free feed pipe, a frost protection heating cable of 20 W or 30 W is recommended to be wrapped around the feed pipe. The power supply is made with a 24 V-100 W, 200 W or 500 W transformer. The cable is connected to the transformer in parallel with the trough's heating element.The heating cable and the water line have to be insulated, however, additionally and protected against biting.
-  For better heat distribution, the water pipe has to be wrapped first with an aluminium adhesive tape.
- An on/off thermostat can be additionally installed.
- To keep water frost-free down to -35^oC in rough winters, a valve heating sleeve can be supplied for subsequent installation.

Connection to a water loop

- In combination with a connection set for 3/4" water loop, an easy integration into a water circuit is possible with this trough. For connection to a water circuit we recommend a Suevia heating unit (possibility to have a 1'' connection on special order).
- In order to prevent water in the bowl from freezing, use a heating sleeve around the valve.

Recommended for:  dairy cows, cattle and animals with an anti-suction ring.

Accessories:
- 24 V-80 W heating element (131.0524)
- 24 V-20 W-2 m (101.0861) or 24 V-30 W-3 m (101.1863) heating cables
- Transformers of 100 W (transfo-100ik), 200 W (transfo-200ik), 500 W (transfo-500ik)
- Aluminium adhesive tape (101.1099)
- On/off thermostat (101.0389)
- Heating sleeve (131.0527)
- 3/4'' water loop mounting kit (103.3004)
- Heating units 230 V-3 000 W (101.0303 et 101.0317)
- Galvanized steel protection bar (131.1393)