Constant water level trough float valve, Model 620, double

Stainless steel trough drinker with float valve. For 30 to 40 animals with two facing drinking places.
Fast and sufficient watering with a MAXIFLOW high flow float valve ensuring a water flow of up to 40 litres per minute (8,8 gal).
3/4" male connection on the right or left side.
Comes with two big drain plugs.
Possibility to be mounted on a loop circuit with specific accessories.
Entirely covered top to prevent fouling. Possible mounting on a wall or a post.

Options for frost protection with heating element
- 24V heating elements to fix under the trough.
- To prevent frost in the water inlet, installation of a 2 or 3 meters heating cable is recommended around the pipe 24V-20W-2 m or 24V-30W-3 m.
- Heating cable and pipe must be isolated and protected from animal bites.
- For extremely cold winters, a heating sleeve can be added on the valve.

Connection to a water loop
With a 3/4’’ connection kit (103.1984), it is possible to integrate this trough to a water loop. The pipe is supplied by warm water coming from Suevia heating unit. This system keeps water frost-free and protect pipelines.

Accessories:
1- Galvanized steel protection bar (131.1393)
2- 90o wall mounting (131.1050)
3- 24V-80W heating element (131.0524)
4- Water loop connection set (103.3004)
5- 100W transformer (transfo-100Ik)
6- 200W transformer (transfo-200Ik)
7-500W transformer (transfo-500Ik)
8- Heating sleeve (131.0527)
9- On/off thermostat (101.0389)
10- 6,5' - 2 meters heating cable (101.0861)
11- 9,8' - 3 meters heating cable (101.1863)
12- 50 meters aluminium tape (101.1099)
13- Protection for trough with mounting brackets (131.1394)