Heated water bowl model 46, 3/4'' stainless valve

- This heated livestock waterer is a premium quality and fully enamelled cast-iron drinking bowl. You can install it on a wall or a 2'' to 3'' post. 

- You must order with this waterer a transformer of 100 W (transfo-100ik), 200 W (transfo-200ik) or 500 W (transfo-500ik) – sold separately.

- With a particularly flexible 3/4'' smoothly running stainless steel tube valve. Female connection from the top and a male connection from bottom.

- Very practical, the heated waterer keeps your animals' water frost-free, down to -15°C (remaining water in the bowl will not freeze). The water provided to the animals is in sufficient quantity.

- If you install a 24 V-5 W valve heating plate, the water remains frost-free down to -35°C. It can be installed later (valve heating can be retrofitted ).

Technical characteristics:

- 24 V- 80 W heating element, installed between the two bowls, is easily accessible by separating the bowl from its support. The animal therefore has no contact with the element.

- Water flow continuously adjustable from outside by means of a regulation screw.

- To ensure a frost-free feed pipe, it is recommended to install a heating cable of 24 V-20 W of 2 meters or 24 V-30 W of 3 meters, wrapped around the water pipe and connected to the transformer together with the heating element of the drinker.

- If the heating cable is installed on plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution, the water pipe has to be wrapped with an aluminium adhesive tape.

- One heated waterer is sufficient for 15 to 20 animals.

Accessories for Suevia heated drinker  

• Two fastening brackets for installtion on 2’’ to 3’’ poles (101.0180).
• Connection kit for water loop from the top (103.3005) or from the bottom (103.3006).
• 24 V-5 W valve heating plate with thermostat and a cable of 3 meters (101.1405).
• On/off thermostat (101.0389).
• Heating cable of 24 V-20 W-2 meters (101.0861) or 24 V-30 W-3 meters (101.1863).
• Aluminium adhesive tape (101.1099).

This waterer is recommended for cattle, bulls, calves and horses.