Suevia MINICUP heated drinker for small livestock, model 127K-H

Minicup constant level waterer

- Frost protected up to -20°C by a 24 V - 40 W heating element. It is is mounted under the bowl under a stainless steel cover.

- You must order with this waterer a transformer of 50 W (transfo-50ik), 100 W (transfo-100ik), 200 W (transfo-200ik) or 500 W (transfo-500ik) – sold separately.

- An integrated thermostat in the connection cable trigger and regulate the heating on at 5°C and off at 12°C.

- The bowl is made of cast iron and is plastic coated.

- With float valve up to 5 bar.

- Removable cover made of stainless steel.

- Constant water level – easy adjustment.

- With push-out-plug at the bottom of the bowl for an easy drainage!

- 3/4" male connection from right or left hand side.

Recommended for: sheep, goats, calves, dogs and pets

Technical Specs

- To protect the water supply to the waterer from freezing, it is recommended to install a heating cable in spiral along the water pipe (24 V-20 W-2 m or 24 V-30 W-3 m).

- If this heating cable is installed on plastic pipes, make sure it is suited for warm and cold water. For better heat distribution, wrapped it first with an aluminium adhesive tape.

Accessories:

1- Galvanized adjustable rotating elbow union 1/2’’ x 1/2’’ female/female for use in case of water inlet from the bottom or the top (102.0352)
2- Two meters heating cable, 24V-20W (101.0861)
3- Three meters heating cable, 24V-30W (101.1863)
4- Aluminium adhesive tape for pipe insulation (101.1099)
5- Galvanized protection plate (103.1957)
6- Stainless protection plate (103.1958)